dos design of structures fifth sem

-
 DESIGN OF STRUCTURES-II
L/s: 3/Wk Int:50 End Exam: 50 Total: 100 End Exam: 3 hrs Cr:3

Course Overview:
 Course focus is on Structural Design of elements of Industrial Building in Steel.
Objectives of the Course: To develop the structural design skills of the student in steel.

Expected Skills / Knowledge Transferred: 
Develop capability to design Steel structures.

Course Contents:

 Unit – I
 Design of simple beams including check for shear and deflection for laterally supported and unsupported conditions, analysis of simple beam from strength and stiffness considerations.

Unit – II 
Design of built up beams with flange plates only, Introduction to plate girders (No Design calculations)

Unit – III
 Axially loaded tension members: introduction, net effective areas, analysis and design of tension members including rivet and welded connections, (L-Angle and Tsection only)

Unit – IV Columns:
 Analysis and  design of axially loaded steel columns using single Isection, 2 channels placed back to back and toe to toe, 4-angles etc., including lacing system.

Unit-V
 Design of slab base and gusseted base for axial loads (with out moments) for different columns.

Unit-VI
 Design of grillage foundation for isolated columns only

Unit-VII Purlins:
 Introduction, Dead load, live load and wind loads, design of angle purlin and I-section purlin.

Unit-VIII 
Bracket Connections, Riveted & Welded Connections design of Joints.

 Reference books:
 Ram Chandra. Design of Steel Structures Vol. I, 10th ed. Standard Book House, Delhi, 1999. Dayaratnam, P.Design of Steel Structures. Wheeler Pub., Allahabad, 1992. Ramamrutham, S. and Narayanan, R. Design of Steel Structures, 4th ed. Dhanpat Rai and Sons, Delhi, 1995.

Comments

Post a Comment

Popular posts from this blog

Factors influencing architecture and vernacular architecture

-
Image
Factors influencing architecture and vernacular architecture    Factors that affect architectural design   Each project has a different set of requirements, limitations, challenges, and opportunities that affect a project’s cultural, environmental, technological, and aesthetic contexts. The 10 factors presented below are among the most influential.  CLIENT Some clients have a clear idea of a program, budget, and other project objectives, including the final appearance of the building. Others look to their architect to help them define the project objectives and to design a building that meets those objectives. In both cases the effectiveness of the relationship between client and architect is a major factor in making and implementing design decisions throughout the project. PROGRAM All clients have a series of aspirations, requirements, and limitations to be met in design. The program provides a place for identifying and delineating these factors and any number of r
Read more

UNIT V---METHODICAL APPROACH TO REPAIRS bc 5 th sem breif notes

-
Image
UNIT V---METHODICAL APPROACH TO REPAIRS   CRACKS OVER OPENINGS :  The cracks over the windows had developed over many years due to rusting lintels.   Lintels are made of steel and support the brick over a window openings.     Rusting lintels are the number one reason cracks occur above window frames.    This generally is not a structural issue, but can develop into a structural issue if left unrepaired.  REPAIR :    The only true way to tell if a crack is active is to install a crack monitor.    The proper way to install a crack monitor is to epoxy the monitor to both sides of the crack and leave on the wall or foundation for as long as possible.    SINKING BALCONIES :   There are many things that can increase the risk of injury on a property.    Loose railings on decks and walkways are one of the areas that we need to be aware of.   Wood railing, iron railings, stucco, or even concrete have to be checked regularly to be safe.   The bolt holding the iro
Read more